Protect your sensitive camera and surveillance equipment in extreme cold conditions in our X|Heat heated camera housing constructed of nearly indestructible polycarbonate materials. The X|Heat outdoor camera housing is controlled by our X|Smart power distribution platform with integrated 4 port 10/100Mbps network switch, redundant circulation fans, 12VDC, 24VDC and PoE ports – all remotely controllable via the X|Smart web interface. The heated camera housing was designed to circulate warm air throughout the camera housing melting away image obscuring snow and ice while keeping your sensitive camera, NVR and other integrated components within operating temps. Learn more about X Stream Designs heated camera housing below!
PoE+ And 24VDC Passive PoE Ports
[2] 12VDC And [2] 24VDC • Remotely Controllable
Integrate NVRs, Encoders, Routers And More
Adds 520in3 Of Integration-Ready Space
Control and Monitor Via The Web Or API
Manually Trigger Or Schedule To Keep Your Dome Clean
12VDC, 24VDC, PoE+ And 24VDC Passive PoE Ports
Check Temperatures, Fluid Levels And Power Loads
Severe Weather And Extreme Environmental Demands
Hot, Cold, Wet/Rainy, Salty Ocean Air, Bugs, Grime, Blowing Dust
No-Rust, No-Corrosion Polycarbonate Construction
No more cleaning crews or employee safety risks
Wall Mount Bracket (Included) or Pole Mount Adapter (Optional)
Eliminate Poor Image Quality From Dirty Dome Lenses
Compatible With Any Camera With A Pan/Tilt Head Under A 7.25″ Diameter
Slide The Enclosure Onto The Bracket and Secure From The Inside With Four 1/4-20 x 3/4” Bolts
Industry-Standard 2” x 5.5” OC Hole Pattern
Dual Circulation Fans Provide Redundant Circulation of Heated Air Keeping Integrated Components Within Operating Temps
Remotely Controlled Power Inputs:
[2] 24 VDC Power Ports, [2] 12VDC Power Ports
Integrated Networking:
4 Port 10/100Mbps Ethernet Switch With Remotely Controllable 30 Watt PoE+ And 24VDC Passive PoE
Input Source Power:
120/220VAC Standard (10-60VDC Optional)
Redundant 6,000 RPM 9.9 CFM Circulation Fans Push And Pull Air Throughout The Entire Enclosure System
Protects Equipment By Eliminating Hot Spots